Thursday, June 12, 2014

TURBINE PROCESS and PARTS

300MW STEAM TURBINE


Turbine is a prime mover. It can rotate pump, compressor, alternator etc.

Types of Turbine:-
            There are three types
            1. Gas Turbine

            2. Steam Turbine

            3. Water Turbine

Gas Turbine:-
            Gas fired directly inside the casing and diffuser, heat power rotates the rotary.

Steam Turbine:-
            Steam will flow inside the turbine through NAZZLE by HP/IP/LP three stages, it can be rotated the rotary.

Water Turbine:-
            Water pressurized then injected through NAZZLE and VANES, it can be rotated rotary.

Pressure should be controlled by PCV (Butterfly Valve)

            The entire turbine should be governed by Governor.

                        (Governor-Speed controlling mechanism for variation of load.)

Types of Governor:-
1.     Hit and miss governing

2.     Quality governing

3.     Quantity governing

Types of Steam Turbine:-
1.     Evaporation Type- More than atmosphere pressure.

2.     Condensate Type-Less than atmosphere pressure.

Types of Water Turbine:-
1.     Impulse Type-Water directly the injected in VANES.

2.     Reaction Type-Water indirectly the injected in VENES.

Steam Turbine Standard Code:-
API 611, API 612

                                                            (API stands-American Petroleum Institute.)  

RPM – Revolution per Minute

                                    Process variables:
           
 Steam Temperature          :           535⁰C

 Steam Pressure                  :           150 bar

 RPM                                       :           3000

 Capacity                                :           300 MW

 Make                                      :           Toshiba, Japan.      

Parts of Turbine:-

  •  Bottom Casing

  •  Top Casing

  •  Rotar HP/IP/LP

  •  Diffuser

  •  Venes

  •  Lube Oil Pump

  •  Nazzle

  •  Pressure Control Valve

  •  Governor

  •  Journal Bearing

  •  Timing Gear

  •  Starting Motor

  •  Forced Close Non return valve (FCNRV)

  •   Over Speed Tripping Mechanism

9 comments:

  1. Nice article learn more about instrumentation and control engineering

    Basics of instrumentation and control engineering

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. Great post. Thank you so much for sharing detail knowledge of Turbine. I learned many things for it. Visit to know more: Macmichael Nwaiwu

    ReplyDelete
  4. I will recommend anyone looking for Business loan to Le_Meridian they helped me with Four Million USD loan to startup my Quilting business and it's was fast When obtaining a loan from them it was surprising at how easy they were to work with. They can finance up to the amount of $500,000,000.000 (Five Hundred Million Dollars) in any region of the world as long as there 1.9% ROI can be guaranteed on the projects.The process was fast and secure. It was definitely a positive experience.Avoid scammers on here and contact Le_Meridian Funding Service On. lfdsloans@lemeridianfds.com / lfdsloans@outlook.com. WhatsApp...+ 19893943740. if you looking for business loan.

    ReplyDelete
  5. No doubt, you wrote this blog after a lot of research because it carries all the information required. Check the best Oil and Gas Accredited Investors on Wall Street List. A Wall Street List is 100% current and 100% legal. We acquire our lists through a variety of different methodologies.

    ReplyDelete
  6. Hi, thanks for sharing information about Electrical Instrumentation Dealer. This is very informative and easy to connect.

    ReplyDelete
  7. Great insights about the importance of regular boiler servicing. Many homeowners forget that routine maintenance can improve efficiency and help avoid expensive repairs during winter.
    Emergency Call out 24/7: +44 7934557446

    Gas Engineer Glasgow
    Plumber in Glasgow
    RF Pumbing and Heating

    ReplyDelete